MRF Wood Stain for Interior 1L
search
  • MRF Wood Stain for Interior 1L
  • MRF Wood Stain for Interior 1L

MRF Wood Stain for Interior 1L

₹524.00
Tax included

Quick Drying Solvent Based Wood Stain

Also Available 

MRF Wood Stain MRF Wood Stain MRF Water Based Wood Stain MRF Exterior Wood Stain
100ml Interior Solvent Wood Stain 500ml Interior Solvent Wood Stain 100ml Water Wood Stain 100ml Exterior Solvent Wood Stain

MRF Wood Stains Shades

Wood Stain Colours: Teak
Quantity

 

Security policy

 

Delivery policy

 

Return policy

MRF Interior Wood Stain is a solvent based, wood stainer exclusively for use on interior wood. The wood stain is translucent. While the stain provides a hue to the wood, the natural wood grains are still visible, giving it a rustic appeal. It is avaliable in a wide range of shades and can be used along with PU, Polishes and Melamine.

Features

  • Enables staining of wood to colours of your choice
  • Can help match variations in colour of the wood
  • Fast drying
  • Colour fast in the shade
  • Compatible with most wood finish top coats and sealers
  • Can be inter-mixed to produce different wood hues
  • Wide range of colours

Limitations

  • This product is a wood stain and not a final finish. The wood stain application must be protected by a top coat such as PU, Polish or Melamine.
  • Interior wood stain is not recommended for use on exteior woods as it is not colour fast under sunlight.

Application

  • Sand the surface of the wood using open coated aloxite sand paper of grit 120 along the grains of the wood. For hard woods, it might be necessary to sand using a coarse grit such as 80.
  • Wet the surface using a damp cloth. Allow the water to soak into the grains. Once the grains have swollen to the maximum, sand again using open coated aloxite sand paper grit 120 along the grain.
  • Allow to dry and sand using open coated aloxite sand paper of grit 180 along the grain.
  • Use the wood stain directly to attain a dark tone. Dilute with suitable thinner (NC or PU thinner depending on the top coat) to get a lighter tone.
  • Soak a cotton rag in the wood stain. Wipe the wood surface with the rag along the grain with a smooth sweeping motion.
  • Make sure not to place the rag at one spot for too long. This will lead to a patchy finish.
  • The coating system can be applied once the stain has dried for 4-6 hours, depending on the ambient conditions of temperature and humidity.
50 Items

Data sheet

Material
Solvent Based
UV Resistant
No
Colour
Wide Range
Method of Application
Brush, Spray, Rag
Drying Time
Quick
New
Comments (0)
No customer reviews for the moment.