• Out-of-Stock
SmartCare Epoxy Tile Grout 1Kg
search
  • SmartCare Epoxy Tile Grout 1Kg

SmartCare Epoxy Tile Grout 1Kg

₹950.00
Tax included

Asian Paints SmartCare Tile Grout - Epoxy Based is a two component epoxy resin based tintable grout specifically designed for use in application of ceramic tiles, vitrified tiles and stone joints where a hygienic and sterile condition is expected.

Colour: Lily White - Arabian Sand - L133
Quantity
Out-of-Stock

  Security policy

Read our Security Policy

  Delivery policy

Fast Deliveries

  Return policy

Easy Returns

Asian Paints SmartCare Tile Grout - Epoxy Based is a two component epoxy resin based tintable grout specifically designed for use in application of ceramic tiles, vitrified tiles and stone joints where a hygienic and sterile condition is expected.

Features

Specifications 2 Component epoxy based, easy to mix joint filler available in 26 brilliant shades
Impervious Impervious ensuring excellent waterproofing in wet areas
Excellent adhesion – sustainable and durable up to the life of the tile
Hygienic Ideal for areas where hygiene maintenance is critical like Laboratories, Breweries, Clinics and Bathrooms
Chemical Resistance Non-toxic and Chemical resistant

Coverage

Refer to the Technical Datasheet at the bottom of this page for coverage.

Areas of Application

  • Grouting floors and walls in the food industry (dairies, breweries, food plants, shops etc) where hygiene is required.
  • Grouting ceramic tiles on laboratory benches, kitchen work surfaces, bathroom, washroom, shower areas etc.
  • Grouting of swimming pools, industrial floors and walls where mechanical and chemical attack resistance is required.

Application

Application Video
Application Description

SURFACE PREPARATION

  • Make sure tiles are firmly set, and adhesive or mortar is completely dry for 24 hours.
  • Remove all spacers, pegs, ropes and string; clean joints by removing free loose dirt particles.
  • To ensure desired results, a mockup installation is required before the actual installation.

PREPARING MIX

  • Always mix complete units. Parts A (Base) and B (Hardener) arepackaged to the exact quantity ratio for proper mixing. Partial mixing will result improper/no curing of grout.
  • In a clean container, mix all of Part A (Tinted material) and all of Part B. Use a slow-speed stirrer for mixing to get a homogenous, consistent color. A small quantity, can be mixed manually at the site.

APPLICATION

  • Press the grout firmly by using a hard rubber squeeze, into joints ensuring that the joints are completely filled.
  • Remove the excess grout material from joints and surface by moving the squeeze diagonally to the grout lines.

CLEANING

  • Clean off the surplus grout from tile joints and surface after 20-25 minutes.
  • Initially use a rough textured sponge dampened with clean water.
  • Use the damp sponge in a circular motion and keep it relative to the tile surface to achieve the flush joint.
  • After completion of work clean the grout haze from the tile with clean water or soap solution.

PRECAUTIONS

  • Wear suitable rubber gloves to avoid skin contact during application.
  • Never apply the Epoxy Tile Grout on wet/damp surface.
  • Do not allow water to flow/run in to ungrouted joints while application.
  • Apply masking tapes along tile joints while working on unglazed floor tiles, natural stones tiles with matt glaze or textured surfaces.

TECHNICAL DETAILS

a. Pot life: Approx. 60 minutes
b. Foot Traffic: 24 hrs
c. Heavy Traffic: 7 days
d. Specific gravity: 1.8
e. Sag: No sag
f. Tensile Bond Strength (14 days air drying): > 4.5 MPa
g. Water absorption: Nil
h. Linear Shrinkage: Nil

New
Comments (0)