- -5%
Touchwood Interior/Exterior Glossy 1L
₹254.00
₹241.30
Save 5%
Tax included
Asian Paints Woodtech Touchwood is a transparent single pack(1K) polyurethane(PU) wood finish that enhances the natural look of the wood, protects the wood from wear and is water and sunlight resistant.
Also Available
MRF Eezeewood Exterior Matt | MRF Eezeewood Exterior Glossy | MRF Eezeewood Interior Glossy | Touchwood Exterior Matt |
Security policy
Read our Security Policy
Delivery policy
Fast Deliveries
Return policy
Easy Returns
Touchwood Gloss enhances the natural beaty of the wood. It can be applied on surfaces that under go daily wear such as table tops and entrance doors. The coating is resistant to the effects of sunlight and water, thus providing a long lasting protection to the wood.
Features
- Interior and Exterior - UV and sunlight resistant
- Resistant to scratches
- Water resistant
- Easy to apply using a brush or roller
Application
- Sanding : Sand the surface usin emery paper 180 grit and then using emery paper 320 and wipe clean.
- Thinning : Thin by adding 5% volume of Mineral Turpentine Oil in case of brushing and 15-20% in case of spraying.
- Application : Apply in a flowing coat to ensure maximum penetration.
- Recoating : Apply 3 coats of Woodtech Touchwood Exteriors at an interval of 8-10 hours. Sand lightly with emery paper 320 grit between coats.
Points to note
Use of inferior quality thinners and sealers/fillers should be avoided since it compromises the quality of the coating.
Technical Details
- Recommended Thinner : Mineral Turpentine - 5 to 20% by Volume
- Drying and recoating Time : 6-8 hours
- Coverage : 70 - 80 sqft per coat. Subsequent coats will have up to 15% higher coverage.
- Finish : Transparent, Glossy
Comments (0)