Araldite Klear 450g

Araldite Klear is a two part epoxy adhesive that is quick-setting, clear and bonds a wide range of materials such as stone, metal, plastic,glass, cement, wood etc. Aradite Klear Joints are waterproof, stress proof, Resistant to Heat, Corrosion & most chemicals.

Features

• High-Speed Adhesion Extremely fast bonding within just five minutes of open time.
• Completely Clear Transparent appearance makes it usable in visible applications.
• High Strength Provides high strength comparable to standard epoxy adhesives upon full curing.
• Aradite Klear Joints are waterproof, stress proof, Resistant to Heat, Corrosion & most chemicals.

Technical Specifications

• 100% Transparent appearance on final setting
• Sets in 5 minutes
• Pot Life - use immediately upon mixing

Directions of Use

• Roughen, dry and degrease surfaces to be bonded.
• Measure out equal amounts by volume from both containers.
• Mix thoroughly
• Apply thin layer on both surfaces
• Clamp Joint for 5 minutes as Araldite Klear sets