Araldite Standard 450g High Strength Epoxy Adhesive (250g Resin + 200g Hardner)
₹775.00
Tax included
Araldite is a two part standard epoxy adhesive that bonds a wide range of materials.
Also available
Klear 1.8Kg | Klear 450g | Klear 180g | Klear 26g |
Standard 1.8Kg | Standard 180g |
Security policy
Read our Security Policy
Delivery policy
Fast Deliveries
Return policy
Easy Returns
Araldite is a two part standard epoxy adhesive that bonds a wide range of materials such as stone, metal, plastic,glass, cement, wood etc. Aradite Joints are waterproof, stress proof, Resistant to Heat, Corrosion & most chemicals.
Features
- High-Strength Adhesion Extremely strong bond
- Long open time
- High shear and peel strength
- Easy to apply
- Good resistance to static and dynamic loads
- Electrically insulating
- Aradite Joints are waterproof, stress proof, Resistant to Heat, Corrosion & most chemicals.
Materials Araldite can bond
- Metal
- Ceramics
- Wood
- Vulcanized Rubber
- Foams
- Plastics
Technical Specifications
- 2 Part Standard Epoxy Adhesive
- Yellowish appearance on final setting
- Recommended Cure Schedules:
Temperature | Handling Strength | Minimum Cure Time |
---|---|---|
68ºF (20ºC) | 12 hours | 15 hours |
77ºF(25ºC) | 7 hours | 12 hours |
104ºF (40ºC) | 2 hours | 3 hours |
158ºF (70ºC) | 30 minutes | 50 minutes |
212ºF (100ºC) | 6 minutes | 10 minutes |
302ºF (150ºC) | 4 minutes | 5 minutes |
-
For more details on bond strength and other specifications, please refer to the technical data sheet available at the bottom of this page.
Directions of Use
- Roughen, dry and degrease surfaces to be bonded.
- Measure out equal amounts by volume from both containers.
- Mix thoroughly
- Apply thin layer on both surfaces
- Clamp Joint as Araldite sets
Comments (0)