Araldite Standard 1.8Kg High Strength Epoxy Adhesive (1Kg Resin + 800g Hardner)

Araldite is a two part standard epoxy adhesive that bonds a wide range of materials such as stone, metal, plastic,glass, cement, wood etc. Aradite Joints are waterproof, stress proof, Resistant to Heat, Corrosion & most chemicals.

Features

• High-Strength Adhesion Extremely strong bond
• Long open time
• High shear and peel strength
• Easy to apply
• Good resistance to static and dynamic loads
• Electrically insulating    
• Aradite Joints are waterproof, stress proof, Resistant to Heat, Corrosion & most chemicals.

Materials Araldite can bond

• Metal
• Ceramics
• Wood
• Vulcanized Rubber
• Foams
• Plastics 

Technical Specifications

• 2 Part Standard Epoxy Adhesive
• Yellowish appearance on final setting
• Recommended Cure Schedules:

• For more details on bond strength and other specifications, please refer to the technical data sheet available at the bottom of this page.

Directions of Use

• Roughen, dry and degrease surfaces to be bonded.
• Measure out equal amounts by volume from both containers.
• Mix thoroughly
• Apply thin layer on both surfaces
• Clamp Joint as Araldite sets