MRF Aquacoat, Single Component, Water Based PU Finish for Interior Wood and Furniture.
4 Item Items
Warning: Last items in stock!
By buying this product you can collect up to 87 loyalty points. Your cart will total 87 points that can be converted into a voucher of Rs. 4.35.
. Random Orbital Sander
. Velcro Discs for Orbital Sanders 5" or 6" - Open coated type - Grits 120, 150, 180, 220
. Sheets for Hand Sanding - Open coated type - Grits 120, 150, 180, 220
. Scotch Brite Hand Pads or Steel Wool.
. Brush 2", 3"
. Felt Roller 4"
. Putty Knives 2", 3", 4"
. Dent Filler
. Wood Filler
. Water Based Polyurethane Base Coat (This Product)
. Water Based Polyurethane Top Coat - Matt
. Water Based Polyurethane Top Coat - Glossy
. Clean potable water.
. Sand the veneer/wood along the grain with papers of grit 120/150. An orbital sanding machine can also be used with the same grits.
. For woods with carving or grooves, Scotch Brite Handpads or Steel Wool must be used for sanding.
. Brush on a coat of wood preservative along the grains for exterior woods and allow to dry for 3-4 hours.
. If the wood has been polished previously using traditional Spirit based polish, apply a coat of wood filler using a putty knife or muslin cloth after sanding and wood preservative application. Allow to dry for 3-4 hours.
. Using a dent filler, fill major dents and imperfections using a putty knife.
. Apply the 1st coat of interior/exterior sealer by spray, brush or roller depending on the depth of the grains, along the grain. For 2K systems, the hardner has to be mixed in the given proportion - Be sure to allow for sufficient maturation time and to use the material within the given pot life. Dilution of up to 10% is allowed using clean water.
. Allow to dry for 4-5 hours.
. Sand the 1st coat using 180/220 grit sand paper. A white powder as a result of sanding is an indication of successful application and curing of sealer.
. Apply a 2nd coat of sealer and repeat the process followed for the 1st coat.
. Once sealer coats are completed, apply 1st coat of topcoat matt or glossy by spray or roller. For 2K systems, the same precautions apply. Dilution of upto 10% is allowed using clean water.
. Apply a 2nd top coat after 5-6 hours.
. Buffing operations can be taken up for glossy topcoats after about 12 hours and within 4 days from the time of application of the 2nd topcoat.
We have well preserved wood with excellent aesthetics, Eco-friendly too!!!!
MRF Aquacoat is a Water Based PU Finish for Interior and Exterior Wood. It is a single component fully reacted PU Dispersion with very low to no VOC. It can be brushed, rolled or sprayed. It is available in Matt and Glossy finishes. Being water based, it has all the above features.
Areas of application
. For Green Building.
. Projects that require fast turnarounds.
. Can be used where spraying is impractical or impossible such as windows which require scaffolding to reach.
No customer comments for the moment.
Rs. 359.10 -10% Rs. 399.00
Rs. 225.00 -10% Rs. 250.00