MRF Freshwood Interior Glossy 1L

₹725.00

Tax included

2 Pack 100% Polyurethane(PU) Transparent Gloss finish Topcoat for Interior Woods.

Security policy

Read our Security Policy

Delivery policy

Fast Deliveries

Return policy

Easy Returns

Description
Product Details

MRF Fresh Wood is a 2 pack 100% polyurethane mid-range transparent finish available in both glossy and matt finishes. It is meant for interiors only. This wood finish offers excellent adhesion and gloss retention as well as good sealing effect against moisture.

Features

Available in Matt & Glossy finishes.
Excellent sealing effect against moisture.
Good Scratch hardness.
Good resistance to heat.
Ease of Maintenance.
Does not leave stains on contact with alcohol, beverages etc.

Areas of Application

Wooden articles in interiors, Furniture, Hand Rails, Kitchen Cabinets, Wardrobes, Interior Doors & Windows.

Technical Specifications

Product	Mixing Ratio	Recommended Thinner	Supply Viscosity (Secs FC B4@ 30⁰C) - Part A	Theoretical Coverage (Sq. Ft per Coat)	Typical Film Thickness (in Microns)	Gloss - Units @60⁰	Touch Dry (Minutes)	Tack Free (Hours)	Hard Dry (Hours)	Pot Life (Hours)	Thinner Intake %Age	Application
Acrylic Wood Filler	N.A	N.A	N.A	70 - 75	35	N.A	15	1	8	N.A	N.A	Putty Blade
FreshWood Interior Sealer	1:1	Thinner for Finish	130 +/- 25	80 - 85	35	N.A	10-12	1	12	1 hr 30 min	10 - 15	Conventional Spray: Nozzle 0.059 inch / 35 - 45 PSI
FreshWood INT. Glossy Clear	1:1	Thinner for Finish	75 +/- 10	80 - 85	35	90 - 95	10-12	1	12	3	20 - 25	Conventional Spray: Nozzle 0.059 inch / 35 - 45 PSI
FreshWood INT. Matt Clear	1:1	Thinner for Finish	125 +/- 25	80 - 85	35	12 - 14	10-12	1	12	4	8 - 10	Conventional Spray: Nozzle 0.059 inch / 35 - 45 PSI

Application Procedure

Surface Preparation

The raw wooden surface to be coated should be clean, dry, free from moisture, dampness and other contamination.
Sand the surface using Emery Paper No. 80, followed by grit sizes 120, 150, 180 and Emery No. 220. This step wise approach leads to a very smooth surface. Always sand in the direction of the wood grain.
The step wise process is applicable only for hard wood. Start with Emery No.220 for veneer ply surfaces.

Application

Mix the base thoroughly prior to mixing with the hardener. Avoid applying in direct sunlight or when the humidity is very high.
Apply 2 to 3 coats of FreshWood PU Interior Sealer clear with an interval of 12 hrs between the subsequent coats. Sanding should be done prior to the application of each coat.
Emery Paper No. 220 can be used for the first coat and Emery Paper No. 400 can be used for the second and third coats.
The number of coats of sealer required varies from 2 to 3 depending on the absorption of wood.
Apply 2 coats of either FreshWood PU Interior Glossy clear with an interval of 12 hrs between each coat. Sand the first coat with Emery Paper No.600
WoodStain shades can be used to enhance the colour of the wood grain. The available shades can be used over either the first coat or the second coat of sealer clear. Sanding of the applied shade is not permitted.