2 Pack 100% Polyurethane(PU) Transparent Gloss finish Topcoat for Interior Woods.
15 Item Items
Warning: Last items in stock!
By buying this product you can collect up to 64 loyalty points. Your cart will total 64 points that can be converted into a voucher of Rs. 3.20.
|Coverage||70 - 80 Sqft / Ltr / Coat|
|Recoating Time||6 - 8 Hours|
|Method of Application||Spray|
|Pack||2 Part - Resin + Hardner|
MRF Fresh Wood is a 2 pack 100% polyurethane mid-range transparent finish available in both glossy and matt finishes. It is meant for interiors only. This wood finish offers excellent adhesion and gloss retention as well as good sealing effect against moisture.
Wooden articles in interiors, Furniture, Hand Rails, Kitchen Cabinets, Wardrobes, Interior Doors & Windows.
|Product||Mixing Ratio||Recommended Thinner||Supply Viscosity (Secs FC B4@ 300C) - Part A||Theoretical Coverage (Sq. Ft per Coat)||Typical Film Thickness (in Microns)||Gloss - Units @600||Touch Dry (Minutes)||Tack Free (Hours)||Hard Dry (Hours)||Pot Life (Hours)||Thinner Intake %Age||Application|
|Acrylic Wood Filler||N.A||N.A||N.A||70 - 75||35||N.A||15||1||8||N.A||N.A||Putty Blade|
|FreshWood Interior Sealer||1:1||Thinner for Finish||130 +/- 25||80 - 85||35||N.A||10-12||1||12||1 hr 30 min||10 - 15||Conventional Spray: Nozzle 0.059 inch / 35 - 45 PSI|
|FreshWood INT. Glossy Clear||1:1||Thinner for Finish||75 +/- 10||80 - 85||35||90 - 95||10-12||1||12||3||20 - 25||Conventional Spray: Nozzle 0.059 inch / 35 - 45 PSI|
|FreshWood INT. Matt Clear||1:1||Thinner for Finish||125 +/- 25||80 - 85||35||12 - 14||10-12||1||12||4||8 - 10||Conventional Spray: Nozzle 0.059 inch / 35 - 45 PSI|
The raw wooden surface to be coated should be clean, dry, free from moisture, dampness and other contamination.
Sand the surface using Emery Paper No. 80, followed by grit sizes 120, 150, 180 and Emery No. 220. This step wise approach leads to a very smooth surface. Always sand in the direction of the wood grain.
The step wise process is applicable only for hard wood. Start with Emery No.220 for veneer ply surfaces.
Mix the base thoroughly prior to mixing with the hardener. Avoid applying in direct sunlight or when the humidity is very high.
Apply 2 to 3 coats of FreshWood PU Interior Sealer clear with an interval of 12 hrs between the subsequent coats. Sanding should be done prior to the application of each coat.
Emery Paper No. 220 can be used for the first coat and Emery Paper No. 400 can be used for the second and third coats.
The number of coats of sealer required varies from 2 to 3 depending on the absorption of wood.
Apply 2 coats of either FreshWood PU Interior Glossy clear with an interval of 12 hrs between each coat. Sand the first coat with Emery Paper No.600
WoodStain shades can be used to enhance the colour of the wood grain. The available shades can be used over either the first coat or the second coat of sealer clear. Sanding of the applied shade is not permitted.
Refer to the manufacturer's Material Safety Data Sheet at the following link :
No customer comments for the moment.
Rs. 226.01 -3% Rs. 233.00
Rs. 359.10 -10% Rs. 399.00
Rs. 225.00 -10% Rs. 250.00