MRF Freshwood Interior Sealer 1L
search
  • MRF Freshwood Interior Sealer 1L

MRF Freshwood Interior Sealer 1L

₹699.00
Tax included

2 Pack 100% Polyurethane(PU) Transparent finish for Interior Woods.

Quantity

  Security policy

Read our Security Policy

  Delivery policy

Fast Deliveries

  Return policy

Easy Returns

MRF Fresh Wood is a 2 pack 100% polyurethane mid-range transparent finish available in both glossy and matt finishes. It is meant for interiors only. This wood finish offers excellent adhesion and gloss retention as well as good sealing effect against moisture.

Features

  • Available in Matt & Glossy finishes.
  • Excellent sealing effect against moisture.
  • Good Scratch hardness.
  • Good resistance to heat.
  • Ease of Maintenance.
  • Does not leave stains on contact with alcohol, beverages etc.

Areas of Application 

Wooden articles in interiors, Furniture, Hand Rails, Kitchen Cabinets, Wardrobes, Interior Doors & Windows.

Technical Specifications

ProductMixing RatioRecommended ThinnerSupply Viscosity (Secs FC B4@ 300C) - Part ATheoretical Coverage (Sq. Ft per Coat)Typical Film Thickness (in Microns)Gloss - Units @600Touch Dry (Minutes)Tack Free (Hours)Hard Dry (Hours)Pot Life (Hours)Thinner Intake %AgeApplication
Acrylic Wood Filler N.A N.A N.A 70 - 75 35 N.A 15 1 8 N.A N.A Putty Blade
FreshWood Interior Sealer 1:1 Thinner for Finish 130 +/- 25 80 - 85 35 N.A 10-12 1 12 1 hr 30 min 10 - 15 Conventional Spray: Nozzle 0.059 inch / 35 - 45 PSI
FreshWood INT. Glossy Clear 1:1 Thinner for Finish 75 +/- 10 80 - 85 35 90 - 95 10-12 1 12 3 20 - 25 Conventional Spray: Nozzle 0.059 inch / 35 - 45 PSI
FreshWood INT. Matt Clear 1:1 Thinner for Finish 125 +/- 25 80 - 85 35 12 - 14 10-12 1 12 4 8 - 10 Conventional Spray: Nozzle 0.059 inch / 35 - 45 PSI

Application Procedure

Surface  Preparation

  • The raw wooden surface to be coated should be clean, dry, free from moisture, dampness and other contamination.
  • Sand the surface using Emery Paper No. 80, followed by grit sizes 120, 150, 180 and Emery No. 220. This step wise approach leads to a very smooth surface. Always sand in the direction of the wood grain.
  • The step wise process is applicable only for hard wood. Start with Emery No.220 for veneer ply surfaces. 

Application

  • Mix the base thoroughly prior to mixing with the hardener. Avoid applying in direct sunlight or when the humidity is very high.
  • Apply 2 to 3 coats of FreshWood PU Interior Sealer clear with an interval of 12 hrs between the subsequent coats. Sanding should be done prior to the application of each coat.
  • Emery Paper No. 220 can be used for the first coat and Emery Paper No. 400 can be used for the second and third coats.
  • The number of coats of sealer required varies from 2 to 3 depending on the absorption of wood.
  • Apply 2 coats of either FreshWood PU Interior Glossy clear or FreshWood PU Interior Matt clear depending on the requirement.
  • WoodStain shades can be used to enhance the colour of the wood grain. The available shades can be used over either the first coat or the second coat of sealer clear. Sanding of the applied shade is not permitted

50 Items
New
Comments (0)

Customers who bought this product also bought: