MRF Metal Coat Polyester Putty, Light Weight Body Filler 1Kg

MRF Metal Coat Polyester Putty is a high strength, light weight, fast setting filling putty, that can be used to fill large dents and gaps in metal, wood, plastic FRP etc.

Features

• Excellent workability and easy to apply
• Fast Setting time - 15-20 minutes
• Excellent sandability
• Adheres to most materials
• Excellent adhesion to primer and paint
• Covers even large dents and undulations
• Extremely hard setting and high strength
• Staining can be mixed to match the surface
• Can be applied directly to bare metal, wood etc without the need for priming

Application

• Ensure that the surface to be coated is free of dirt, oil, grease and other contaminents.
• Mix the base and hardner in the ratio 97:3 on a clean flat surface using a putty knife and apply within 3 minutes.
• Mix only the quantity that can be applied within 3 minutes.
• Sanding of the polyester putty can be done after 15 to 20 minutes of application using emery #80 followed by #220 and #400.
• Apply the appropriate primer after completion of the sanding process.
• For deep dents upto 3mm, apply in several layers, allowing each layer to dry before applying the subsequent layer.

Precautions

• Flammable
• Harmful by inhalation
• Irritating to eyes and skin
• Do not breathe vapour
• In case of contact with eyes, rinse with plenty of water and seek medical advise.
• Use only in well ventilated areas