Araldite Standard High Strength Epoxy Adhesive 1.8Kg (1Kg Resin + 800g Hardner)
search
  • Araldite Standard High Strength Epoxy Adhesive 1.8Kg (1Kg Resin + 800g Hardner)
  • Araldite Standard 1.8Kg High Strength Epoxy Adhesive (1Kg Resin + 800g Hardner)
  • Araldite 1.8Kg

Araldite Standard 1.8Kg High Strength Epoxy Adhesive (1Kg Resin + 800g Hardner)

₹1,485.00
Tax included

Araldite is a two part standard epoxy adhesive that bonds a wide range of materials.

Also available

Araldite Klear
Araldite Klear 1.8Kg Araldite Klear 450g Araldite Klear 180g Araldite Klear 26g
Klear 1.8Kg Klear 450g Klear 180g Klear 26g

Araldite Standard
Araldite 450g Araldite 180g
Standard 450g Standard 180g
Quantity

  Security policy

Read our Security Policy

  Delivery policy

Fast Deliveries

  Return policy

Easy Returns

Araldite is a two part standard epoxy adhesive that bonds a wide range of materials such as stone, metal, plastic,glass, cement, wood etc. Aradite Joints are waterproof, stress proof, Resistant to Heat, Corrosion & most chemicals.

Features

  • High-Strength Adhesion Extremely strong bond
  • Long open time
  • High shear and peel strength
  • Easy to apply
  • Good resistance to static and dynamic loads
  • Electrically insulating    
  • Aradite Joints are waterproof, stress proof, Resistant to Heat, Corrosion & most chemicals.

Materials Araldite can bond

  • Metal
  • Ceramics
  • Wood
  • Vulcanized Rubber
  • Foams
  • Plastics 

Technical Specifications

  • 2 Part Standard Epoxy Adhesive
  • Yellowish appearance on final setting
  • Recommended Cure Schedules:
Temperature Handling Strength Minimum Cure Time
68ºF (20ºC) 12 hours 15 hours
77ºF(25ºC) 7 hours 12 hours
104ºF (40ºC) 2 hours 3 hours
158ºF (70ºC) 30 minutes 50 minutes
212ºF (100ºC) 6 minutes 10 minutes
302ºF (150ºC) 4 minutes 5 minutes

  • For more details on bond strength and other specifications, please refer to the technical data sheet available at the bottom of this page.

Directions of Use

  • Roughen, dry and degrease surfaces to be bonded.
  • Measure out equal amounts by volume from both containers.
  • Mix thoroughly
  • Apply thin layer on both surfaces
  • Clamp Joint as Araldite sets

23 Items
New

You might also like

Comments (0)