Dr Fixit 217 Crack X Shrinkfree 750ml

Dr. Fixit Crack-X Shrinkfree is a non-shrink, non-sag plaster crackfilling compound composed of quality polymers, select fillers & additives. Crack X Shrinkfree can be used to fill plaster cracks up to 10mm in width.

Features

• Shrinkage: non-shrink even after curing, prevents from cohesive & adhesive failure on exposure.
• Application: applied as one time filling (does not require second time application, as required in other acrylic sealants).
• User friendly: One pack, very soft paste, easily applicable by fingers or putty knife.
• Sagging: non-sag nature helps in filling of vertical & overhead cracks.
• Sanding: no sanding is required.
• Staining: Does not migrate any liquid component into concrete surface thus prevents staining.
• Adhesion: excellent adhesion to cementitious surfaces prevents water leakages through the cracks.
• Durability: UV & weather resistance properties increases the life expectancy of the surface.
• Paintability: easily paintable after 5-6 hours of application
• It is fast drying and flexible.
• Light weight, putty like material used for filling cracks in plastered surfaces.
• Water resistant after drying

Limitations

• Not for cracks in POP or painter’s putty.
• Not recommended to use under direct rain impact.
• Not meant for structural cracks in concrete, slab, construction joints.
• Jet or Power washing on walls not advisable prior to application.

Method of Application

Surface Preparation

• Surface must be free from dust, oil, grease, and loose particles, etc. moisten the surface before applying Dr.Fixit Crack-X Shrinkfree.
• Fine hairline cracks must be widened upto 1 mm minimum and then filled.
• For filling Dr. fixit Crack-X Shrinkfree on the internal surfaces, existing POP or painter’s putty must be removed till plaster surface is exposed.

Application

Application Video

Application Description

• Press Dr. fixit Crack-X Shrinkfree firmly into the crack One time Only with a spatula or putty knife and level the surface.
• Handball application can also be used as per the convenience.
• Care must be taken to avoid formation of cavities or bubbles during application.
• Allow it to dry in ambient conditions for 5-6 hrs before painting. for best results 7 days air curing is advised.
• Further POP or painters putty application can be taken up once it is fully dry.

CLEANING

• Clean tools & equipments by soap & water. Wash hands with soap & warm water.

Coverage

• 30-34 running meter per litre for a depth & width of 5 mm

Technical Information

• Appearance White paste
• Base acrylic with specially added fillers
• Drying time@ 30 °C, hrs 5 - 6
• full curing time@ 30 °C, days 7
• Specific gravity 0.0.26 +/-0.02