SmartCare DampProof Grey 4L

Asian Paints SmartCare Damp Proof is a fiber reinforced elastomeric liquid applied water proofing membrane. It is formulated with select elastomeric and resilient acrylic polymers and reinforcing polyester fibers. Upon curing, it forms a thick, seamless, durable membrane thus offering ultimate waterproofing for terraces, balconies, chajja, walls and other exterior surfaces.

Features

Water proofing Waterproofing protection of up to7 bars hydrostatic pressure.
Crack bridging Unmatched crack bridging ability due to elastomeric properties.
Mechanical strength Reinforced with glass fibers for superior abrasion resistance.
Adhesion Strong adhesion to masonry substrates.

High sheen High sheen, brilliant white colour and thick coat results in high levels of heat reflectance.
Anti carbonation Reduces carbon dioxide and chloride ion diffusion thus protecting re-bars against corrosion.
Use & maintenance Single pack, easy to apply and simple re-coating.

COVERAGE

50 sq.ft/ltr for 2 Coats

RECOMMENDED USAGE

Can be used for building roofs, terraces, parapet, sunshades and exterior vertical walls. It can also be applied on existing IPS, sound brick-bat coba or cementatious waterproofing.

SURFACE PREPARATION

PLASTER New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.

CLEANING Surface should be free from any loose paint, dust or grease. Remove all existing bitumen coatings completely. It is recommended to use intense wire brushing or high speed water jet for thorough cleaning.

REPAIRING The substrate must be checked for its soundness using small hammer. All cracks at corner joints, channels and parapets should be properly treated.

FILLING FOR CRACKS For filling cracks upto 3mm use Asian Paints Crack Seal. Bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars.

APPLICATION

1. Apply a first self priming coat of SmartCare Damp Proof, by diluting with 33% of water.
2. Allow to dry between coat 4-6 hours
3. Apply first waterproofing coat without any dilution. Allow to dry 4-6 hours.
4. Apply the second waterproofing coat without any dilution in a perpendicular direction to the first.

Application can be done using a brush or a roller.

PRECAUTIONS

• Do not apply during rains or extreme temperatures.
• Avoid abuses which may lead to puncturing of membrane.
• Ensure that the product is applied at least 6 inches inside the drain pipe.
• For best results, apply parapet to parapet to envelope the entire building.

TECHNICAL DETAILS
a. Form: Ready to use viscous liquid
b. Mix Density: 1.26
c. Application temperature: 5ºC to 35ºC