Viking Teflon (PTFE) Thread Seal Tape 15mm x 10m



Viking Teflon(PTFE) Thread Seal Tapes for Plumbing - 15mm x 10m

More details

998 Items

By buying this product you can collect up to 3 loyalty points. Your cart will total 3 points that can be converted into a voucher of Rs. 0.15.

Rs. 30.00

Volume discounts

QuantityPrice per Piece
Buy 10 @ Rs. 27.00

Volume discounts

QuantityPriceYou Save
10 Rs. 27.00 Up to Rs. 30.00

More info

Viking Teflon Tapes are known for their consistent quality, standard size and accurate thickness which make them the most preferred thread seal tape for plumbers. Teflon tapes seal and lubricate threaded pipe joints in metal and rigid PVC pipes.

Why use Viking Teflon Tape

  • There is no chance of leakage - Plumbers use dhaga/safeda which only cover the first few threads and has a good chance of leakage, but thread seal tapes cover all the threads and fill the gaps between them.
  • Wide Temperature range.
  • Quick to apply, clean to use and provides an air tight seal.
  • Consistent thickness
  • Accurate length - unlike other local brands that provide lesser length than promised.

Areas of Application in threaded pipe joints

  • Pipe-to-Valve Threads
  • Shower-to-Arm Threads
  • Wall Socket-to-Valve/Tap Threads
  • Faucet-to-Connection pipe Threads
  • All applications where cotton thread and shellac were traditionally used to seal plumbing joints.

How to use Thread Seal Tapes

  1. Clean the male threads at the end of the pipe with a clean rag.
  2. Place the end of the thread seal tape on the second thread from the end of the pipe and hold it in place with a finger or thumb. The tape should lie flat (not bunched up) over the threads and extend perpendicularly to the length of the pipe.
  3. Begin wrapping the tape around the pipe in the opposite direction to the direction the pipe will be turned.
  4. Maintain tension on the tape so it wraps snugly around the pipe. Work away from the end of the pipe, overlapping the tape as you go.
  5. Complete four to six wraps around the pipe, finishing near the end of the threads (opposite the end of the pipe).
  6. Break the tape from the roll by gripping it between thumb and forefinger and pulling sharply; it breaks easily. Smooth the loose end down over the threads. The pipe is now ready to go into the fitting.


  • Width : 15mm
  • Length : 10m
  • Colour : Yellow
  • Temperature range : -65 to 200 degree celsius.


Write a review

Viking Teflon (PTFE) Thread Seal Tape 15mm x 10m

Viking Teflon (PTFE) Thread Seal Tape 15mm x 10m

Viking Teflon(PTFE) Thread Seal Tapes for Plumbing - 15mm x 10m

Write a review


Customers who bought this product also bought:

27 other products in the same category: