MRF Aquafresh Cool is Water Bourne Single Pack PU based exterior finish. A perfect solution to the summer heat. Paint your terrace with Aquafresh Cool to get instant relief from the heat inside your home. The application of this product can reduce the ambient temperature to upto 10°C in 50°C heat depending on the practical conditions.
Features
- Heat reduction of upto 10°C
- Long life of 5-7 years unlike lime based products that wear off with foot traffic.
- Easy to apply.
Application
Surface Prepration
- Ensure that the surface to be painted is clean and free from dust, dirt and other contaminations.
- For areas severely affected by algae and fungi, ensure that the surface is completely cleaned using a biowash before initiating the painting process.
- Freshly plastered sufraces must be allowed to cure completely. The coating process can be started after a minimum period of 30 days.
Application Procedure
- For fresh surfaces apply 1 coat of Aquafresh Primer and allow to dry for 4-5 hours.
- For already painted surfaces, check the soundness of the paint film. Scrape off any loose paint. If the film seems fairly stable, Aquafresh Cool can be applied directly onto it.
- For badly damaged paint films it is recommended to vigourously wire brush the paint and then apply a coat of Aquafresh Primer.
- After satisfactory examination and filling of dents and cracks using a suitable crack filler, application of Aquafresh Cool can be commenced.
- Brush Apply 2-3 coats of Aquafresh Cool with an interval of 4-5 hours between coats.
- Light foot traffic is advisable after 24 hours. Heavy foot traffic can be allowed after 72 hours.
Quick Tips
- For efficient heat reflection, it is advised to keep the surface free of dirt. Water can be used to wash the surface.
- Aquafresh Cool must be the final coat of paint. No further coating must be applied over it.
- Aquafesh Cool can also be applied on vertical sun facing walls following the same procedure as for the terrace.
- It is advised not to tint shades in Aquafresh Cool as the reflective effeciency will be compromised.
Technical Specifications
Untreated Roof Temperature : 50.2°C
Treated Roof Temperature : 39.2°C
Coverage : 80sqft / 1 Liter / 1 Coat
Comments (0)