MRF Specta PU Anti-Rust Enamel 1L
search
  • MRF Specta PU Anti-Rust Enamel 1L
  • MRF Specta PU Anti-Rust Enamel 1L

MRF Specta Glossy PU Anti-Rust Enamel 1L

₹365.00
Tax included

Single pack, brushable polyurethane based Enamel for wood and metal surfaces. Anti-rust, long lasting finish.

Other Finishes Available

MRF Specta PU Satin Enamel
Satin
Shade: Golden Brown 410
Quantity

  Security policy

Read our Security Policy

  Delivery policy

Fast Deliveries

  Return policy

Easy Returns

MRF Specta is a polyurethane based enamel that can be brushed, rolled or sprayed onto metal and wood surfaces for a durable, long lasting finish. It is especially useful on mild steel surfaces as it forms a UV resistant moisture barrier and prevents rust and corrosion.

MRF Specta Shade Card

Features

  • Fast Drying
  • Water resistant
  • UV resistant
  • Brush, Roll, Spray
  • Long lasting finish
  • Available in Satin & Gloss Finishes
  • Wide range of attractive shades

Application Procedure

Surface Preparation

  • For Metal : Ensure that the surface is dry, clean and free from impurities like oil, grease, loose rust and cracked or flaked paint. Sand the surface with #180 sand paper and ensure no loose particles are present before priming. Wipe the surface Clean.
  • For Wood : The raw wooden surface to be coated should be clean, dry, free from moisture, dampness and other contamination. Sand the surface using #80 sand paper, followed by grit sizes #120, #150, #180 and #220 sand paper. This step wisse approach leads to a very smooth surface. Always sand in the direction of the grain. This step wise process is applicable for hard wood. Start with #220 sand paper for veneer or plywood.

Application

For Metal

  • Shake can thoroughly before opening. Ensure paint is mixed well before thinning.
  • Apply 2 Coats of SPEP Primer (thinning with 1110 Thinner 10% by volume) by brush or spray with an interval of 4-6 hours between coats.
  • The primed surface can be sanded using #220 sand paper after 10-12 hours of drying.
  • Appropriate filler to be used for filling dents and imperfections which should then be sanded and primed again.
  • Apply 2 coats of Specta Glossy/Stain shade diluted with 15-20% by volume of thinner 555 with an interval of 6-7 hours by brush or spray (30-35% thinner 555).

For Wood

  • Apply 2 to 3 coats of MRF Vapocure paints Wood Primer with an interval of 5-6 hours between subsequent coats.
  • Sanding should be done prior to application of Topcoat.
  • #400 sand paper can be used for sanding after 10-12 hours of drying.
  • Apply 2 coats of Specta Glossy/Stain shede with an interval of 6-7 hours by brush or spray.

Technical Specifications

  • Thinner RecommendedThinner 555
  • Thinner Intake - 15-20% for Brushing, 30-35% for Spraying
  • Coverage - 120 sqft per litre per coat

12 Items
New
Comments (0)