Dr Fixit 201 Crack-X Crack Filling Paste

Dr. Fixit Crack-X Paste is composed of high quality, weather durable acrylic emulsion polymer, graded fillers, light fast pigment & additives.

Features

• It is a single pack, ready to use flexible putty for filling cracks in plastered surfaces
• Excellent bonding
• Ease of application
• Water resistance
• Aesthetic appearance & durability.

Areas of Application

Internal & external plastered brick masonry wall cracks up to 5mm wide.

Method of Application

SURFACE PREPARATION

• Surface must be free from dust, oil, grease, and loose particles etc. Moisten the surface before applying Dr. Fixit Crack-X Paste
• Fine hair line cracks must be widened up to 1 mm minimum using a scrapper and then filled
• For filling Dr. Fixit Crack-X Paste on the internal surface, existing POP or painter’s putty must be removed till plaster surface is exposed
• For porous surfaces, apply primer coat prepared with Dr. Fixit Crack-X Paste and water in 1:1 proportion over the crack. Fill Dr. Fixit Crack-X Paste when the surface is tacky and not dried completely

APPLICATION

Application Video

Application Description

• Press Dr. Fixit Crack-X Paste firmly into the crack with a spatula or putty knife and level with the surface
• Care must be taken to avoid formation of cavities or bubbles during application
• Allow it set for 24 hours and then apply another coat of Dr. Fixit Crack-X Paste
• Further POP or painter’s putty application can be taken up once it is fully dry
• For best results allow Dr. Fixit Crack-X Paste to cure for 7 days

CLEANING

• Immediately after use, wash all tools with clean water
• Incase of contact with skin, wash with plenty of water

Coverage

25-30 running foot/kg (for a groove crack of 5mm x 5mm).