Fevicol MarineKoat 1L - Polymer based Waterproof Coating for Furniture Backboards

Fevicol MarineKoat is a waterproof coating developed to protect furniture such as kitchen cabinets and wardrobes that are attached to a back wall from water leakages. Fevicol MarineKoat forms a tough and permanent waterproof coating that prevents plywood, MDF and wood from absorbing moisture and water from an attached wall. The furniture is protected from water damage from any future leaks from the adjoining walls and also prevents moisture absorption in a highly humid environment. 

Fevicol MarineKoat is a transparent coating that forms a tough, water resistant film over plywood, MDF and wood. It adheres strongly to the substrate and forms a permanent barrier coat to moisture and water.

Fevicol MarineKoat is a ready to use, single component product and can be easily applied using a brush or roller.

Features

• Forms a tough, waterproof film
• Ready to use, no mixing required 
• Easily applied by brush and roller
• Strong adhesion to plywood, wood and MDF
• Permanent barrier to water leaks from back wall

Coverage

Coverage - 100 Sq. Ft / Lt

Method of Applcation

• Clean the surface of plywood from dust, dirt, oil , grease etc.
• Dip the brush inside the pack and stir the material properly before each use.
• Apply first even coat of MarineKoat on entire Plywood surface then wait for 10 to 15 minutes.
• Apply a second coat of MarineKoat over the first as explained above.
• Do not apply excess material
• After application, dip the brush in normal water and clean it properly.  

Technical Specifications

• Physical Appearance: Dark Brownish Colour Liquid
• Base: Water based
• Odour: Odour less
• Flow: Continuous & Smooth
• Viscosity with B4 Ford Cup Measurement: 30 to 40 Seconds
• pH: 7.5 to 9.00