Asian Paints Woodtech Epoxy Insulator Exterior for PU & Polyester 2Ltr Kit - Resin 1Ltr + Hardner 1Ltr

Asian Paints Woodtech Epoxy Insulator Neo is a multipurpose transparent epoxy that can be applied on wood to create a barrier coat between the wood and Polyurethane (PU) & Polyester. The application of the Epoxy Insulator provides the following benefits:

• The insulator acts as a barrier coat thus preventing leaching of oils from the wood that could cause film failure of the finish coats such as polyurethane and polyester.
• Any chemicals and solvents that have been used to prepare the wood surface are also prevented from reacting with solvents and polymer coatings applied subsequently.

The benefits of using Asian Paints Woodtech Epoxy Insulator:

• The Insulator forms a tough, transparent and colourless coating on the wood. It does not change the natural colour of the wood.
• It can be applied on Interior and Exterior Wood surfaces.
• It is supplied in easy to measure packs. The hardner : epoxy ratio is a simple 1 : 1
• It can be used as a barrier coat for polyurethane(PU) & Polyester coatings on wood.
• It does not react with commonly used solvents such as xylene, toluene, acetone
• Can be applied by brush, spray or rag.
• Ready to apply and does not need any thinning.

Method of Application

• Mix the hardner and resin in the ratio 1 : 1. Mix only the amount that can be used within 45 minutes of mixing.
• Soak a rag with the mixed material and spread across the wood in the direction of the grain.
• Wait for 24 hours for the Epoxy Insulator to completely set.
• Apply subsequent coats of material as required.