MRF Melamine Glossy Economical Clear Wood Polish 20L

MRF Melamine is an economical 2 component wood finish that is excellent for use in interiors. It is a transparent finish that can be applied on interior doors, table tops, wardrobe doors and other interior furniture. The finish is long lasting and is resistant to water. It is supplied in 2 parts - resin and hardner. Melamine can be sprayed over existing French polish to give it a lasting finish.

Features

• MRF Melamine is water resistant.
• It is durable and long lasting.
• It is a low cost, economical finish.
• It can be easily sprayed on French polished surfaces.
• Available in Matt, Glossy and Sealer variants.
• MRF Melamine has certified low lead content - less than 90ppm.

Areas of Application 

• Interior doors
• Interior Furniture
• Table Tops
• Wardrobe Doors

Method of Application

• The raw wooden surface to be coated should be clean, dry, free from moisture ,dampness and other contamination
• For hard wood, sand the surface using Sandpaper #80, followed by Sandpapers #120, #150, #180 and #220
• For Veneer ply surfaces,start with Sandpaper #220
• This step wise approach makes the surface smooth
• Always sand in the direction of the wood grain
• Mix the base thoroughly prior to mixing with the hardener
• Avoid applying in direct sunlight or when the humidity is very high
• Apply 2 to 3 coats of Melamine Sealer clear with an interval of 8 hrs between subsequent coats. Sanding should be done prior to the application of each coat. The number of coats varies depending on the absorption of wood
• #220 Sandpaper can be used for the first coat and #400 Sandpaper can be used for the second and third coats
• Apply 2 coats of either Melamine Glossy Clear or Matt Clear depending on the requirement, with an interval of 8 hrs between subsequent coats. Sanding of the 1st coat of top coat shall be done with #600 or #1000 Sandpaper
• MRF Woodstains Interior shades can be used to enhance the colour of the wood grain. The available shades can be used over either the first coat or the second coat of sealer clear sanding of the applied shade is not permitted
• For Interior applications use Woodstains Interior shades only

Thinning Details

• Thinner Recommended - Thinner 3830

Technical Specifications

2 Pack - Resin : Hardner - 9 : 1