Aquadur Interior White Water Based 1K PU Matt Opaque Top Coat 1Litre

Features

• No Primer required !
• It is a Self-Sealing product, does not require application of sealer as a base coat.
• Can be applied on all kinds of solid woods such as teak, pine, beech, shesham etc
• Can also be applied on all kinds of engineered woods like Plywood, MDF, WPC etc
• Water based systems have faster drying times and are easier to apply
• Faster turn around times because of few application steps
• Eco-friendly - very low percentages of volatile organic compounds.
• Not only are these products environmentally responsible, projects can also be turned around faster.
• Can be brushed and roller. Can also be sprayed
• No solvents required, only water is required for thinning and cleaning - thus posing a very low health hazard to applicators.
• Polyurethane has the property of having good abrasion resistance, good UV stability and creates an impermeable water barrier.
• Aquadur Water based PU film is flexible and scratch resistant.
• Excellent for indoor furniture.
• The finish is pleasing to the eye and the matt finish is soft to the touch. It gives the wood a natural, well finished and rounded look. 

Application

Materials Required

• Random Orbital Sander 5"
• Random Orbital Sander 6"
• Velcro Discs for Orbital Sanders 5"- Open coated type - Grits 120, 150, 180, 220 
• Velcro Discs for Orbital Sanders 6"- Open coated type - Grits 120, 150, 180, 220
• Sheets for Hand Sanding - Open coated type - Grits 120, 150, 180, 220
• Scotch Brite Hand Pads or Steel Wool.
• Brush 2", 3"
• Felt Roller 4"
• Putty Knives 2", 3", 4"
• Dent Filler
• Wood Filler
• Water Based Polyurethane Top Coat - Matt (This Product)
• Water Based Polyurethane Top Coat - Glossy
• Clean potable water.

Application

• Sand the veneer/wood along the grain with papers of grit 120/150. An orbital sanding machine can also be used with the same grits.
• For woods with carving or grooves, Scotch Brite Handpads or Steel Wool must be used for sanding.
• Using a dent filler, fill major dents and imperfections using a putty knife.
• Apply 1st coat of topcoat by spray or roller. Dilution of upto 10% is allowed using clean water.
• Apply a 2nd top coat after 5-6 hours.

We have well preserved wood with excellent aesthetics, Eco-friendly too!!!!

Asian Paints Aquadur is a Water Based PU Finish for Interior and Exterior Wood. It is a single component fully reacted PU Dispersion with very low to no VOC. It can be brushed, rolled or sprayed. Being water based, it has all the above features.

Areas of application

• For Green Building.
• Projects that require fast turnarounds.
• Can be used where spraying is impractical or impossible such as windows which require scaffolding to reach.