Tractor Emulsion White 20L

PRODUCT BENEFITS

A Smart Upgrade
Tractor Emulsion is the perfect way to make a smart upgrade from distempers. It offers the finish of plastic
paint, at a cost that is not too different from distemper. It gives 1.5 times the coverage of distemper, so you
need less material. It also lasts for at least 3 - 4 years, so you don’t have to paint that often.

Smooth finish
Tractor Emulsion offers your walls a smooth emulsion finish, making it the perfect value for money paint.

Colour
Tractor Emulsion offers a wide range of shades (1600+). It is also available in vibrants. So you can choose your favourite colours for your home.

COVERAGE

On normal masonry surface after brushing 1 COAT
250 - 270 sq.ft/ltr**
2 COATS
130 - 150 sq.ft/ltr**

PRE PAINTING STEPS

PLASTER New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days
as the curing time for new masonry surfaces.

CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Asian Paints DampBlock to limit further dampness.

FILLING FOR CRACKS For filling cracks upto 3mm use Asian Paints SmartCare Exterior Sealer.

FILLING FOR HOLES & DENTS
In case of dents and holes use Asian Paints Acrylic Wall Putty or white cement and fine sand in the ratio 1:3

For interior surfaces or substrates that are subjected to continuous seepage or dampness, kindly use Asian Paints SmartCare Damp Block before the top coat application.

Shelf life: 3 years from date of manufacture in original tightly
closed containers away from direct sunlight and excessive
heat.

APPLICATION

SANDING Sand the surface with sand paper 180 and wipe clean.

PRIMER Apply a coat of Asian Paints Decoprime Water Based Primer diluted in the ratio 1:0.8 wth water OR Apply a coat of Asian Paints Decoprime Solvent Based Primer diluted in the ratio 1:0.1 with Mineral Turpentine on the prepared surface. Allow to dry for 6-8 hours.

PUTTY Apply Asian Paints Acrylic Wall Putty in 2-3 coats depending on the condition of the wall. Allow drying time of 4-6 hours between coats.

SANDING Sand the surface with sand paper 180 and wipe clean.

PRIMER Apply a coat of Asian Paints Decoprime Water Based Primer diluted in the ratio 1:0.8 wth water OR Apply a coat of Asian Paints Decoprime Solvent Based Primer diluted in the ratio 1:0.1 with Mineral Turpentine on the puttied surface. Allow to dry for 6-8 hours.

SANDING Sand the surface with sand paper 180 and wipe clean.

FIRST COAT of Tractor Emulsion applied by diluting with water in the ratio 1:0.4 by volume. Allow to dry for 4 hours.

SECOND COAT of Tractor Emulsion applied by diluting with water in the ratio 1:0.4 by volume. Allow to dry for 4 hours.