MRF 600°C Heat Resistant Aluminium Paint 1L

Features

• The paint film is resistant to temperatures upto 600°C.
• This high quality heat resistant aluminium paint can be used for industrial and domestic purposes.
• Does not require any primer.
• It is easily brush, roll or spray applied and gives an excellent finish.
• Excellent coverage and hiding.
• Gives a tough, wear resistant film.

Specifications

• Supplied in a 2 part pack. Part A - binder and Part B - Aluminium paste.
• Dilution of upto 10% can be used for the purpose of paint spread with MRF Thinner 3830.
• The finish is metallic silver in appearance.
• Paint will fully cure only on exposure to temperatures nearing 600°C. This product is not recommended for use at lower temperatures as the paint will not achieve full cure.
• No primers and putties must be used. The paint must be applied directly onto the pre-prepared substrate.

Application Areas

• Vehicle exhausts and engine parts.
• High heat chimneys for furnaces.
• Inside and outside Furnaces upto 600°C in manufacturing industries and plants.
• Metal fabrication such as grills and support beams and struts.
• Vehicle body works.

Application 

• The surface to be painted must be free of oil, grease and dust.
• Sand the surface with appropriate emery to remove any rust and corrosion.
• Apply Heat Resistant 600°C with a brush, roller or spray diluted up to 10% with MRF thinner 3830. 
• Full cure of paint achieved only on exposure to high temperatures nearing 600°C

Recommended Products for use with Heat Resistant 600°C Aluminium paint

Thinners

MRF Thinner 3830

No primers and putties are recommended for use with this product.