Ace Exterior Emulsion White 20L

PRODUCT BENEFITS

Better Performance
ACE offers excellent resistance to chalking, cracking and weathering in comparison to cement paint. Its modified acrylic binder ensures that paint stays on your wall longer than cement paint.

Save Money in the Long Run
ACE lasts longer than cement paint and hence proves more economical in the long run. It also does not require curing and therefore saves time, effort and money during application.

Clean Shades
ACE gives neat and clean shades that do not fade and last longer than cement paint shades. It is available in strong/dark shades that provide excellent hiding. It is available in over 1500 attractive shades.

Better Anti-algal Performance
ACE provides better anti-algal protection than cement paint especially in dry to moderately humid climatic conditions.

PRE PAINTING STEPS

PLASTER New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.

CLEANING Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss
should be removed by wire brushing and water. In case of areas having excessive dampness use Asian Paints
SmartCare DampBlock to limit further dampness. When the underlying surface exhibits chalkiness, in spite of
thorough surface cleaning, use Asian Paints SmartCare Exterior Sealer.

FILLING FOR CRACKS For filling cracks upto 3mm use Asian Paints SmartCare Crack Seal.

FILLING FOR HOLES & DENTS In case of dents and holes use Asian Paints Wall Putty or white cement and
fine sand in the ratio 1:3 For exterior surfaces or substrates that are subjected to continuous seepage or dampness, kindly use Asian Paints SmartCare DampProof, before the top coat application.

APPLICATION

PRIMER Apply 1 Coat of Asian Paints Exterior Primer diluted in the ratio 1:1 with Water.

FIRST COAT ACE EXTERIOR EMULSION Apply the first coat of Ace by diluting it with water in the ratio 1 : 0.25. Allow to dry for 4-6 Hrs.

SECOND COAT ACE EXTERIOR EMULSION Apply the second coat of Ace by diluting it with water in the ratio 1 : 0.25. Allow to dry for 4-6 Hrs.

A third coat is recommended for horizontal surfaces.