SmartCare Epoxy Tile Grout 1Kg

New

Asian Paints SmartCare Tile Grout - Epoxy Based is a two component epoxy resin based tintable grout specifically designed for use in application of ceramic tiles, vitrified tiles and stone joints where a hygienic and sterile condition is expected.

More details

17 Items

By buying this product you can collect up to 82 loyalty points. Your cart will total 82 points that can be converted into a voucher of Rs. 4.10.


Rs. 820.00

More info

Asian Paints SmartCare Tile Grout - Epoxy Based is a two component epoxy resin based tintable grout specifically designed for use in application of ceramic tiles, vitrified tiles and stone joints where a hygienic and sterile condition is expected.

Features

Specifications 2 Component epoxy based, easy to mix joint filler available in 26 brilliant shades
Impervious Impervious ensuring excellent waterproofing in wet areas
Excellent adhesion – sustainable and durable up to the life of the tile
Hygienic Ideal for areas where hygiene maintenance is critical like Laboratories, Breweries, Clinics and Bathrooms
Chemical Resistance Non-toxic and Chemical resistant

Coverage

Refer to the Technical Datasheet at the bottom of this page for coverage.

Areas of Application

  • Grouting floors and walls in the food industry (dairies, breweries, food plants, shops etc) where hygiene is required.
  • Grouting ceramic tiles on laboratory benches, kitchen work surfaces, bathroom, washroom, shower areas etc.
  • Grouting of swimming pools, industrial floors and walls where mechanical and chemical attack resistance is required.

Application

SURFACE PREPARATION

  • Make sure tiles are firmly set, and adhesive or mortar is completely dry for 24 hours.
  • Remove all spacers, pegs, ropes and string; clean joints by removing free loose dirt particles.
  • To ensure desired results, a mockup installation is required before the actual installation.

PREPARING MIX

  • Always mix complete units. Parts A (Base) and B (Hardener) arepackaged to the exact quantity ratio for proper mixing. Partial mixing will result improper/no curing of grout.
  • In a clean container, mix all of Part A (Tinted material) and all of Part B. Use a slow-speed stirrer for mixing to get a homogenous, consistent color. A small quantity, can be mixed manually at the site.

APPLICATION

  • Press the grout firmly by using a hard rubber squeeze, into joints ensuring that the joints are completely filled.
  • Remove the excess grout material from joints and surface by moving the squeeze diagonally to the grout lines.

CLEANING

  • Clean off the surplus grout from tile joints and surface after 20-25 minutes.
  • Initially use a rough textured sponge dampened with clean water.
  • Use the damp sponge in a circular motion and keep it relative to the tile surface to achieve the flush joint.
  • After completion of work clean the grout haze from the tile with clean water or soap solution.

PRECAUTIONS

  • Wear suitable rubber gloves to avoid skin contact during application.
  • Never apply the Epoxy Tile Grout on wet/damp surface.
  • Do not allow water to flow/run in to ungrouted joints while application.
  • Apply masking tapes along tile joints while working on unglazed floor tiles, natural stones tiles with matt glaze or textured surfaces.

TECHNICAL DETAILS

a. Pot life: Approx. 60 minutes
b. Foot Traffic: 24 hrs
c. Heavy Traffic: 7 days
d. Specific gravity: 1.8
e. Sag: No sag
f. Tensile Bond Strength (14 days air drying): > 4.5 MPa
g. Water absorption: Nil
h. Linear Shrinkage: Nil

Reviews

No customer comments for the moment.

Write a review

SmartCare Epoxy Tile Grout 1Kg

SmartCare Epoxy Tile Grout 1Kg

Asian Paints SmartCare Tile Grout - Epoxy Based is a two component epoxy resin based tintable grout specifically designed for use in application of ceramic tiles, vitrified tiles and stone joints where a hygienic and sterile condition is expected.

Write a review

Accessories

Customers who bought this product also bought:

19 other products in the same category:

Download