Asian Paints Exterior Wall Primer is a water-based wall coating suitable for application on exteriors as an
undercoat to exterior emulsions.
100 Item Items
Warning: Last items in stock!
By buying this product you can collect up to 555 loyalty points. Your cart will total 555 points that can be converted into a voucher of Rs. 27.75.
|5||Rs. 5,458.98||Up to Rs. 500.00|
1. Excellent opacity and whiteness
2. Improves appearance of top coat
3. Does not chalk and can be applied on adequately cured fresh plaster
4. Does not require curing with water
5. Provides excellent adhesion to top coat emulsions
6. Prevents peeling off of top coat emulsions.
7. Water Based
AREAS OF APPLICATION
It can be used on all types of exterior cement plasters, exterior ceilings, asbestos sheets, concrete and existing painted surfaces.
PRE PAINTING STEPS PLASTER
New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.
CLEANING Ensure that surface is completely free from all dirt, loosely held plaster, powdery residue, oil, grease or any other contamination. Any previous growth of fungus, algae or moss needs to be removed thoroughly by vigorous wire brushing and cleaning with water. One coat of Asian Paints SmartCare BioBlock is recommended to prevent further growth of algae, fungus or moss.
FILLING FOR CRACKS For filling cracks upto 3mm use Asian Paints Smart Care Crack Seal.
FILLING FOR HOLES & DENTS In case of dents and holes use Asian Wall Putty or white cement and fine sand in the ratio 1:3
Apply 1 Coat of Asian Paints Exterior Primer on the prepared surface by diluting with water in the ratio 1:1.
On smooth masonry surface by brushing 1 COAT
120 - 140 sq.ft/ltr**
Please note: Asian Paints Exterior Wall Primer is an undercoat
No customer comments for the moment.