Birla Wallcare Putty is a white cement based powder putty for smooth cement plastered wall surfaces. The putty can be applied directly on to the plastered surface without the need of a primer for binding. White cement based putty has good strength and abrasion resistance. Birla Wallcare putty also has excellent whiteness and anti-carbonation properties.
Features
- White cement based putty
- Good strength and abrasion resistance
- Good impact resistance
- Excellent whiteness
- Anti-carbonation properties
- Can be applied on bare plastered surface, no need of primer.
Limitations
- Finish is semi-smooth.
- Cannot be used on wood.
- Material is in powder form and has to be mixed with water using a mechanical mixer to obtain the usable product.
Method of appication
- Prepare surface to be free of dust, dirt and grease. Remove using mechanical means.
- Mix Wallcare putty with 30-35% water by weight to make a paste. Mix putty thoroughly using a mechanical mixer.
- Pre-wet the surface before application of birla putty.
- Apply putty in a bottom to top direction using a putty knife.
- Allow to dry for atleast 3 hours before a second coat.
- Sand any putty blade marks on the surface and then go for painting.
Comments (0)