Rust-Oleum LeakSeal Flexible Rubber Spray Sealant - Black 340g

265494

New

Rust-Oleum LeakSeal - Flexible Rubber Coating Spray to Seal Leaks and Cracks Instantly - Makes them water-tight giving a paintable finish.

More details

6 Items

By buying this product you can collect up to 85 loyalty points. Your cart will total 85 points that can be converted into a voucher of Rs. 4.25.


Rs. 850.00

More info

Rust-Oleum LeakSeal is a flexible rubber coating that can be sprayed onto a variety of surfaces to make joints in them water tight. LeakSeal can be used on mild steel, aluminium, galvanized steel, PVC, concrete, masonry, asphalt roofing, vinyl siding, fiberglass and more. The finished surface can be easily painted over using oil or latex based/acrylic paints.

Features

  • Dries almost immediately.
  • Forms an elastic film providing a tough, durable finish that doesnt peel off, crack or chip.
  • Easy to use. Any-Angle Spray allows 360 degree can rotation, even upside down. Just hold can 6" away from the surface to be painted and press the nozzle.
  • No need of thinners or brushes.
  • Pressurised spray helps LeakSeal penetrate cracks and seal them effectively.

Areas of Application

  • Masonry cracks
  • Joints in concrete and masonry
  • Roof Slab Cracks
  • Wall Cracks
  • Joints in cladding
  • Joints in conduits and ducts
  • Joints in PVC pipes
  • Joints near skylights
  • Window-wall joints
  • Door Frame and wall joints
  • Joints in industrial roofing sheets etc

Application Method

  • Remove dirt and debris from the area to be coated.
  • Cover and mask off areas to avoid overspray if necessary.
  • Shake the can vigorously for one minute after mixing ball begins to rattle. Shake often during use.
  • A test spray on a cardboard is recommended to get a feel for the spray pattern.
  • Spray surface in short even strokes.
  • Hold can 8-18" from the surface.
  • It is recommended to apply a light coat first. The second coat can be applied heavier.
  • Quicker build up can be achieved by moving can closer to the gap.
  • Allow to dry 15-30 minutes between coats.
  • Dries to touch in 2 hours. Cures in 24 Hours.
  • Can be top coated using latex or oil based paints after 24 hours.

Caution

  • Do not spray near fire or open flame. High temperature may cuase the can to explode.
  • Spray in a well ventilated area.
  • Do not incinerate can.
  • Keep out of reach of children.
  • If sprayed into eyes, flush with water. Consult your physician.
  • After use invert can and spray out until spray is clear to prevent nozzle from clogging.
  • Wipe the nozzle tip using a mineral spirit or thinner before storing.

Videos

Reviews

No customer comments for the moment.

Write a review

Rust-Oleum LeakSeal Flexible Rubber Spray Sealant - Black 340g

Rust-Oleum LeakSeal Flexible Rubber Spray Sealant - Black 340g

Rust-Oleum LeakSeal - Flexible Rubber Coating Spray to Seal Leaks and Cracks Instantly - Makes them water-tight giving a paintable finish.

Write a review

Accessories

Customers who bought this product also bought:

11 other products in the same category: