SikaTop Seal 107 is a two-component, polymer-modified, cementitious waterproofing and protective slurry mortar for concrete. It is slightly flexible to tolerate fine cracks and suitable in both interior and exterior applications.
4 Item Items
Warning: Last items in stock!
By buying this product you can collect up to 72 loyalty points. Your cart will total 72 points that can be converted into a voucher of Rs. 3.60.
SikaTop Seal 107 provides the following beneficial properties:
. Improves the watertightness of water-containing concrete tanks, reservoirs, and clearwells.
. Protects against water penetration, yet water vapor permeable (breathable).
. Excellent freeze/thaw resistance.
. Good adhesion to sound, prepared substrates.
. Easy and fast mixing and application.
. Good abrasion resistance.
. Protects against concrete carbonation (80 mils SikaTop Seal 107 is equivalent to 6 inches of concrete).
. Can be mixed to slurry or trowelable consistency.
. Improves concrete/masonry appearance.
. Available in concrete gray.
. Approved for potable water contact.
Where to use
. Horizontal surfaces subjected to light foot traffic (balconies).
. For waterproofing of drinking water, tanks, reservoirs, and clearwells.
. For internal and external waterproofing and dampproofing concrete, mortar blockwork and brickwork.
. For protection of concrete structures against the deleterious effects of deicing salts and freeze/thaw cycles.
. For sealing “hairline” cracks in concrete structures not subject to movement surfaces.
. For interior and exterior waterproofing of basements.
. Vertical surfaces.
. For dampproofing: apply one coat at 40 mils/1mm thickness.
. For waterproofing: apply two coats at 40 mils/1mm per coat. Theoretical thickness (wet film) on smooth substrates: 40 sq. ft./gal. = 40 mils (2 kg/m2 or 2kg/10sqft) = 1 mm). The above figures are theoretical and do not allow for substrate profile and wastage.
Three coats may be required in areas of extremely high water infiltration.
No customer comments for the moment.