Sale!

Dowsil 789 Black 300ml

New

Dow Corning Dowsil 789 - Weatherproof, One-part, Neutral Cure Silicon Sealant - for general architectural weathersealing.

More details

200 Items

By buying this product you can collect up to 20 loyalty points. Your cart will total 20 points that can be converted into a voucher of Rs. 1.00.


Rs. 200.01

-33.33%

Rs. 300.00

Data sheet

Sealant Curing SystemNeutral / Moisture Cure
Skin Formation Time (min)10-15 mins
Temperature Resistance Range-50C to 150C
Elongation at Break700%
Adhesion to SurfaceAnodized Aluminum, Concrete, Enamelled & Reflective Glass,Fluorocarbon Coated Aluminum. Glass, Heat Strengthened Glass, Low E Coated Glass, Metal Panels, Polyester Powder Coated Aluminum/Steel, Stainless Steel
Shrinkage after CuringLow

More info

DOWSIL 789 Silicone Weatherproofing Sealant is a one part, neutral cure, architectural grade sealant. It easily extrudes in any weather and cures at ambient temperature by reaction with moisture in the air to form a durable, flexible silicone rubber seal.

Features

  • All temperature gunability
  • Primerless adhesion - upon curing will form a strong bond to most common building components without the use of a primer
  • Long-life reliability - cured sealant stays elastomeric from -50°C to 150°C without hardening, cracking or becoming brittle under normal weather conditions
  • Low Modulus with extension/compression capability up to ±50% of original joint width
  • Excellent weatherability, virtually unaffected by sunlight, rain, snow etc.
  • Ease of application - ready to use as supplied

Areas of Application

DOWSIL 789 Silicone Weatherproofing Sealant is a premium performance weather sealing product specifically designed for general glazing and weather sealing in curtain wall and building facades.

Method of Applicaiton

Preparation

  • Clean all joints, removing all foreign matter and contaminants such as grease, oil, dust, water, frost, surface dirt, old sealants or glazing compounds and protective coatings.

Application Method

  • Install backing material or joint filler, setting blocks, spacer shims and tapes.
  • Mask areas adjacent to joints to ensure neat sealant lines.
  • Primer is generally not required on non-porous surfaces, but maybe necessary for optimal sealant of certain porous surfaces. A test placement is always recommended.
  • Apply DOWSIL 789 Silicone Weatherproofing Sealant in a continuous operation using a positive pressure. (The sealant can be applied using many types of air-operated guns and most types of bulk dispensing equipment.) 
  • Before a skin forms (typically within 15~20 minutes), tool the sealant with light pressure to spread the sealant against backing material and the joint surfaces.
  • Remove masking tape as soon as the bead is tooled.

Reviews

No customer comments for the moment.

Write a review

Dowsil 789 Black 300ml

Dowsil 789 Black 300ml

Dow Corning Dowsil 789 - Weatherproof, One-part, Neutral Cure Silicon Sealant - for general architectural weathersealing.

Write a review

Accessories

9 other products in the same category: