Royale Play Timber Tool

Create the Royale Play Timber effect using this tool.

How to create the effect :

• Apply 2 coats of the base coat.
• Using the Royale Play Application roller, apply a 2ft x 2ft patch of the top coat.
• While the top coat is wet, using the line tool on the back of the Timber tool, create vertical lines.
• Using the grain side of the Timber tool, move it along the vertical lines while the top coat is still wet, as shown in the video. 
• Repeat the above 2 steps to cover the complete area.

Timber is an 'off' effect. The top coat is taken off by the timber tool to create this effect.

Application Video